8
shown in Fig 5 will appear on the screen.
Entry into respective subroutine is effected by depressing keys.Input to respective subroutine is
effected by guiding the cursor to an appropriate position (box with appropriate subroutine) and
depressing the key
. Cursor guiding - by depressing keys
.
Output from respective subroutine - by depressing the key
.
SELECT PROCEDURE will appear on the screen, shown in Fig. 5
8.3. Unbalance measurement
Cursor guiding by depressing keys
an position UNBALABCE MEASUREMENT
(Fig.5) and push button
. The computer will set in the subprogramme UNBALANCE
MEASUREMENT, the monitor will show the screen as per figure .6.
After this subprogramme has been initiated , the cursor will always point item 5 ( Q - cut - off
threshold).
Fig.5
Summary of Contents for TROLL 3100
Page 11: ...11 Fig7b L DISTANCE Fig 7 a ...
