15
Fig.10.
Guide cursor keys
to position 1 (Fig.10), with keys ,
and then set cursor
in box first from the left. Push - buttons
so as to have letter P appear in this box. By
means key
enter subsequent box and key
so as to have letter O appear. Following
this procedure complete the word VOLVO.
Guide cursor keys
to position 2 and by means of keys
determine
DISTANCE value appropriate for the particular wheel type.
In silimar manner, programme WHEEL DIAMETER in pos.3, WHEEL WIDTH in pos.4, WHEEL
TYPE in pos.5 and MEASUREMENT ACCURACY in pos.6.
By pushing button
this data are entered to computer memory what is conform by
announcement MEMORY RECORDING. On monitor screen image shown in Fig 9 will appear
with name VOLVO.
8.5. Heading Edit
Input to PROCEDURE SELECT subroutine by pushing button
.
Guide cursor with keys
to position HEADING EDIT (Fig rys.5)and push button
. The computer will be set up in HEADING EDIT position and image shown in Fig.11 will
be displayed on monitor screen.
item 1
item 2
item 3
item 4
item 5
item 6
item 7
Summary of Contents for TROLL 3100
Page 11: ...11 Fig7b L DISTANCE Fig 7 a ...
