27
5 Elelectrical Installation
CAN-BUS
The CAN-BUS is a digital connection to the CNC control.
Optimum conditions are achieved with LABOD CNC controls.
Programming and operation by means of the control panel via the CAN-BUS.
Interface complies with the standard ISO 11898.
Adjustment and programming see Manual DS-CAN.
In
te
rf
a
ce
s
PE on the connector housing
DS/BAMOBIL
PE on the connector housing
The interface is galvanically
isolated from the device.
The voltage is supplied via
the bus cable.
CAN-V+ 9 to 15V=
Option:
potentially isolated internal
voltage supply
FM=input jack
CAN-BUS cable
Use a shielded bus conductor with a low shielding
capacity.
supply.
D-connector with a metal or metallized housing.
Recommended cable colours LiYCY 4x0.25+shield.
Designation
Connector
no.
Cable colour
Cable no.
CAN-V+
9
brown
1
CAN-GND
3
white
4
CAN-H
7
green
3
CAN-L
2
yellow
2
