Basic - Information
3
10/2018 - V01
Q3 15-150A
Stan
da
rds
a
nd g
ui
del
in
es
:
The user must ensure that in the event of:
- device failure
- incorrect operation
- loss of regulation or control
the axis will be safely de-activated.
It must be ensured that the machines, equipment or vehicles are
fitted with device independent monitoring and safety feature.
Non-earthed systems (e.g. vehicles) need to be secured isolation
monitors.
There must be no danger to persons and property arising!
Assembly
- should only be carried out when all voltages have been removed and the units are secured
- should only be carried out by suitably trained personnel
Installation
- should only be carried out when all voltages have been removed and the units are sucured
- should only be carried out by suitably trained personnel for electrics
- should only be carried in accordance with health and safety guidelines
Adjustments and programming
- should only be carried out by suitable trained personnel with knowledge in electronic drives
and their software
- should only be carried out in accordance with the programming advice
- should only be carried in accordance with health and safety guidelines
CE
When mounting the units into machines and installations the proper operating of the units may
not be started until it is ensured that the machine, the installation, or the vehicle comply with the
regulations of the EC machinery directive 2006/42/EG and the EMC guideline 2004/108/EG.
On the installation and test conditions described in the chapter CE-advice it is adhered to the EC
guideline 2004/108/EG including the EMC standards EN61000-2 and EN61000-4.
A manufacturer’s declaration can be requested.
The manufacturer of the machine or installation is responsible for observing the threshold values
demanded by the EMC laws.
QS
The devices are archived with serial number and the test data from the manufacturer for 5 years.
The inspection reports may be requested.
