Basic information
11
Version: 2019 / V05
BAMOCAR-D3-700-100/160
Saf
et
y ad
vi
ce
s
2.10
Safety advices
Machinery directive
The manufacturer of the machine or installation must draw up a hazard analysis for his product.
He must make sure that any unpredictable movements do not cause damage neither to persons
nor to property.
Skilled personnel
Hardware
The skilled qualified personnel must feature a training and instruction for an assignment in the
field of electronic drive engineering. They must have knowledge of the standards and accident
prevention regulations for drive engineering applications and they must be familiar with this field
of activity. Eventually occurring dangerous situations are realized.
The local regulations (IEC, VDE, VGB) are known to the qualified personnel and they are observed
during the works.
Software
The skilled qualified personnel for handling the software must be trained to safely program the
units in the machines and installations. Incorrect parameter settings may cause improper and
impermissible movements. Any parameter settings have to be checked for faulty operation.
Acceptance tests must be thoroughly carried out according the four-eyes principle
Working environment
Incorrect handling of the units may cause damage to persons or property.
The units must be closed during operation.
Any unit covers must not be removed!
Disconnect the power supply prior to any works on electric connections. It must be ensured the
battery voltage is safely switched off.
Any voltages and residual voltages (buffer circuit) must be measured prior to any works on the
unit. Max. permissible voltage < 42 V.
High temperatures (> 70 °C) may arise.
The working environment may be dangerous for persons having electronic medical aids or
appliances (e.g. cardiac pacemakers). Sufficient distance to these electrical parts must be
observed.
Exposure
During transport and storage the prescribed and specified climatic conditions must be adhered to.
The units must not be mechanically damaged. Warped and bent housing parts may influence or
damage the isolation distances. Damaged units must never be installed!
The units comprise parts which may be damaged by electrostatic discharge. The general
recommendations for handling electrostatic devices must be observed. Special attention should
be paid to strongly isolating plastic films and synthetic fiber.
For the operation it must be ensured that the environmental conditions in the switch cabinet are
adhered to. This applies in particular to the impermissible condensation on the units.
