Unitek 6-099-04, Operation And Maintenance Manual

Page: 50 / 88

CHAPTER 3: OPERATING INSTRUCTIONS
MICROPULL
®
IV WIRE BOND PULL TESTER
3-22 990-180
1 12.3 gf 1
2 12.2 gf 1
3 12.0 gf 1
4 12.2 gf 1
5 13.2 gf 1
6 13.3 gf 1
7 13.5 gf 1
8 14.2 gf 1
9 13.0 gf 1
10 12.6 gf 1
11 12.5 gf 1
12 12.8 gf 1
13 13.1 gf 1
14 11.7 gf 1
15 11.5 gf 1
16 11.7 gf 1
Serial Number: 1015
No. of Tests: 16
Aver. Pull Strength: 12.6 gf
Standard Deviation: 0.7 gf
Standard Deviation: 5.8%
Aver. - 3(Std Dev.): 10.4 gf
Disk Files and LOTUS 1-2-3
1 The following procedure is used to import data into Lotus 1-2-3, assuming the disk file contains data
from a series of bonds made in the Non-Destruct or the Destruct Mode.
2 Load Lotus 1-2-3. Change the Default Directory to the MP4 Subdirectory using the /WGDD Command,
and use the /FR Command to retrieve the appropriate template file:
NONDEST.WK1 for Datalogs containing Non-Destruct Test Data
DESTRUCT.WK1 for Datalogs containing Destruct Test Data
The following example uses data collected from a series of bonds made using the Destruct Mode. The
data was saved in a file named DESTRUCT.PRN.
When the data appears on the screen, invoke the "Load Macro" by pressing <ALT> <L>. This macro
will erase the data portion of the template and will conclude with a list of the possible ".PRN" files
displayed on the command line. Move the cursor to the appropriate name, DESTRUCT in this case, and
press <Enter>. Save this file under whatever name is appropriate, using the /FS Command. Invoke the
"Calculate Macro" by pressing <ALT> <C>. Invoke the "Print Macro" by pressing <ALT> <P>.