19
6
H6/7 Black /Green
Wire Channel 4
Output =
Momentary output
H6/7 Black /
Green Wire
Channel 4 Output
= Latched output
H6/7 Black /
Green Wire
Channel 4 Output
= Latched output
and reset with
ignition "on"
H6/7 Black /
Green Wire
Channel 4
Output = Timer
programming (set
to any interval
between 1 second
and 2 minutes.)
Exit:
Turn Ignition to 'ON' position, or leave it for 15 seconds. parking light flashes 5 times
will confirm exit.
Channel 4 Timer Control Output Programming.
Enter:
1. Turn the Ignition 'switch 'ON/OFF' 3 TIMES and stay in OFF position.
2. Push the Valet switch
7 times (holding in on the 7th push)
until three chirps three
parking flashes then release the valet switch. You are now in the Alarm feature
'C'
programming mode.
Timer Program:
1. Press and release
and
buttons together 4 times, [4] LED flash, [4] siren/horn
chirps to indicate that you are in features "Channel 4 Timer Programming mode".
2. Press and hold the valet switch, the timer will immediately start. Every 1second ,siren
chirp one.
3. When the desired interval has passed, release the valet switch. 1 long chirp for
confirmation. (Set to any interval between 1 second and 2 minutes)
Note 1:
If your built-in timer controls window/sunroof closure in your car DO NOT change the timer
setting! This requires installer-only programming. Changing the value will adversely effect
operation and may cause damage.
Note 2:
Momentary output
=The momentary output selection will send a negative signal from the
Channel 4 output immediately when the channel 4 button is pressed and will continue until
the button is released.
Latched output
=The latched output selection will send a negative signal as soon as the
Channel 4 button is pressed and will continue until the button is pressed again
Latched output/reset with ignition
=The latched/reset with ignition output selection
operates just like the latched output but will reset or stop when the ignition is turned on.
Enter:
1. Turn the Ignition 'switch 'ON/OFF' 3 times and stay in OFF position.
2. Push the Valet switch 7 times (holding in on 7th push ) until
three chirps three parking
flashes then release the valet switch. You are now in the Alarm feature "
C
" the
Password Pin Code Setup:
