Chapter 2
Using the Hardware
18
Copyright 2008 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
2. Insert the SD Card with the notched end facing up and into the slot as shown
below:
3. Replace the SD Compartment Cover with the four compartment screws.
Removing a Storage Card
1. Remove the SD Compartment Cover by rotating the screws counterclockwise
with a screwdriver.
2. Press the card in, and release. The card should automatically release.
3. Remove the SD Card from the slot.
Using the Laser Scanner
The PA600 has an integrated laser scanner that reads all major bar code labels.
NOTE:
Reading software must be enabled in order to operate the scanner. This
can be a user loaded application or a preload utility such as Scanner
Settings and Scan2Key.
Press either one of the Scan Buttons to activate
the laser scanner.
Test the PA600’s Laser Bar Code Scanner through
the following:
Scan Button