MS860G WiFi Manual
29
SCANNER CONFIGURATION MANAGER
Bar Code Symbologies, continued
Interleaved 2 of 5
•
Enabled
toggles the ability for the scanner to read I 2 of 5 on or
off.
Default is “Yes”.
•
Code ID
is a user-definable identification letter for I 2 of 5,
which is referred to in the “Use Code ID” function on page 25.
Default is letter “I”.
•
Fix Length (by first 3 reads)
fixes the length of acceptable
subsequent bar code reads from the first three bar codes read.
Useful as a data verification if all bar codes are of a consistent
length.
Default is “No”.
•
Check Digit
defines whether or not a check digit (to insure
data accuracy) is calculated, and if so, whether it should be
sent or not.
Default is “Not Calculate”.
•
Supress Digit
suppresses the output of the first or last bar code
digit.
Default is “Not Suppressed”.
•
Minimum Length
defines the minimum length the user will
accept for a valid bar code.
Default is “10”.
•
Maximum Length
defines the maximum length the user will
accept for a valid bar code.
Default is “64”.