38
MS860G WiFi Manual
SCANNER CONFIGURATION MANAGER
Data Editing, continued
Note:
Even if the original bar code data is not modified, if additional
characters are to be added (see “Add New” below) the original
Start Parameter must be defined as From Position “1” and the
End Parameter defined as “All Remaining”, otherwise, none of
the original data will be output.
Add New
adds characters (printing and
nonprinting) to the data output from the
MS860G.
These characters can be added before, after,
and within the actual scanned data.
Pre-defined characters include:
•
<t> Tab
•
<r> Carriage
Return
•
<n> Line
Feed
•
<d>
Any Digit (data editing)
•
<a>
Any Letter (data editing)
•
<*>
Interblock Delay (data editing)
•
<“> (quotation
marks)
•
<dd>
Character in hexadeximal notation
•
<<>
< (less than)
•
<>>
> (greater than)
Characters must be bracketed by <> symbols.
Letters and numbers should be represented in hexadecimal
format (accessable in a linked menu) to avoid confusion. For
instance, the lower-case letter “t” should be entered as <74>
and the numeral “5” should be entered as <35>.
Function codes (F keys, Cursor Up, Enter, etc.) can also be
inserted via hexadecimal code (accessable in a linked menu).
Delete
removes existing modifier strings.
Move Up / Move Down
(pictured to the right) moves the
modifiers up and down in relation to each other. The top modifier
will be performed first and each one down the list will be performed
in sequence. The original data (modified or unmodified, part or
whole) will be output according to its position in the modifier
sequence.