MS860G WiFi Manual
35
SCANNER CONFIGURATION MANAGER
Bar Code Symbologies, continued
EAN-8
•
Enabled
toggles the ability for the scanner to read EAN-8 on or off.
Default is “Yes”.
•
Code ID
is a user-definable identification letter for EAN-8,
which is referred to in the “Use Code ID” function on page 25.
Default is letter “FF”.
•
Send Leading Digit
toggles sending or not sending a leading
(‘start bar code’) digit.
Default is “Send”.
•
Send Check Digit
toggles sending or not sending a check digit.
Default is “Send”.
Code 11
•
Enabled
toggles the ability for the scanner to read Code 11 on or off.
Default is “Yes”.
•
Code ID
is a user-definable identification letter for Code 11,
which is referred to in the “Use Code ID” function on page 25.
Default is letter “J”.
•
Send Check Digit Number
defines the check digit.
Default is “Send”.
•
Send Check Digit
toggles sending or not sending a check
digit.
Default is “Send”.
•
Minimum Length
defines the minimum length the user will
accept for a valid bar code.
Default is “3”.
•
Maximum Length
defines the maximum length the user will
accept for a valid bar code.
Default is “48”.
Delta Code
•
Enabled
toggles the ability for the scanner to read Delta Code on or off.
Default is “No”.
•
Code ID
is a user-definable identification letter for Delta Code,
which is referred to in the “Use Code ID” function on page 25.
Default is letter “D”.
•
Calculate Check Digit
toggles whether or not to calculate a
check digit.
Default is “Yes”.
•
Send Check Digit
toggles sending or not sending a check
digit.
Default is “Send”.