manualshive.com logo in svg

Unitech MS842N, User Manual

The Unitech MS842N is a high-performance barcode scanner that offers reliable scanning capabilities. To make the most of this device, ensure you have its User Manual handy. Download the manual for free from manualshive.com to get detailed instructions and enhance your experience with this product.

Share
Download
background image

 

 

Enable/Disable Plessey .......................................................................................................................................... 79 

Set Length Range for Plessey ................................................................................................................................ 79 

Parity Check............................................................................................................................................................ 80 

MSI-Plessey............................................................................................................................................................ 81 

Restore Factory Defaults ........................................................................................................................................ 81 

Enable/Disable MSI-Plessey................................................................................................................................... 81 

Set Length Range for MSI-Plessey......................................................................................................................... 81 

Transmit Check Digit............................................................................................................................................... 82 

Parity Check............................................................................................................................................................ 82 

2D Symbologies ............................................................................................................................................................. 83 

PDF 417.................................................................................................................................................................. 83 

Restore Factory Defaults ........................................................................................................................................ 83 

Enable/Disable PDF 417......................................................................................................................................... 83 

Set Length Range for PDF 417............................................................................................................................... 83 

PDF 417 Inverse ..................................................................................................................................................... 84 

PDF417 Twin Code ................................................................................................................................................. 85 

QR Code ................................................................................................................................................................. 86 

Restore Factory Defaults ........................................................................................................................................ 86 

Enable/Disable QR Code ........................................................................................................................................ 86 

Set Length Range for QR Code .............................................................................................................................. 86 

QR Twin Code......................................................................................................................................................... 87 

Aztec Code ............................................................................................................................................................. 88 

Restore Factory Defaults ........................................................................................................................................ 88 

Enable/Disable Aztec Code..................................................................................................................................... 88 

Set Length Range for Aztec Code........................................................................................................................... 88 

Read Multi-barcodes of an Image ........................................................................................................................... 89 

Set the Number of Barcodes................................................................................................................................... 90 

Data Matrix.............................................................................................................................................................. 91 

Restore Factory Defaults ........................................................................................................................................ 91 

Enable/Disable Data Matrix..................................................................................................................................... 91 

Set Length Range for Data Matrix........................................................................................................................... 91 

Rectangular Barcode .............................................................................................................................................. 92 

Data Matrix Inverse ................................................................................................................................................. 92 

Data Matrix Twin Code............................................................................................................................................ 93 

Maxicode................................................................................................................................................................. 94 

Restore Factory Defaults ........................................................................................................................................ 94 

Enable/Disable Maxicode........................................................................................................................................ 94 

Set Length Range for Maxicode.............................................................................................................................. 94 

Summary of Contents for MS842N





































































































































Reviews:

No comments

Related manuals for MS842N

Facit N4000 User Manual preview
N4000
Brand: Facit Pages: 51
YOKO EP3000 User Manual preview
EP3000
Brand: YOKO Pages: 45
Franklin WP5600 User Manual preview
WP5600
Brand: Franklin Pages: 51
Wasp CCD Scanner Programming Manual preview
CCD Scanner
Brand: Wasp Pages: 44
Datalogic QuickScan L QD2300 Quick Reference Manual preview
QuickScan L QD2300
Brand: Datalogic Pages: 32
Mode com MC-CR103 User Manual preview
MC-CR103
Brand: Mode com Pages: 12
SAMUEL JACKSON 81663 Service Manual preview
81663
Brand: SAMUEL JACKSON Pages: 11
Reinecker Videomatic VEO User Manual preview
Videomatic VEO
Brand: Reinecker Pages: 34
Conceptronic CCOMBOGR User Manual preview
CCOMBOGR
Brand: Conceptronic Pages: 21
revoltec Procyon 2.0 User Manual preview
Procyon 2.0
Brand: revoltec Pages: 2
Velleman PCUSB47 User Manual preview
PCUSB47
Brand: Velleman Pages: 23
Datalogic LT-03X Quick Reference Manual preview
LT-03X
Brand: Datalogic Pages: 32
G4S S874-EX Installation And User Instructions preview
S874-EX
Brand: G4S Pages: 2
Conrad 401264 Operating Instructions preview
401264
Brand: Conrad Pages: 4
Follett 5100 Getting Started preview
5100
Brand: Follett Pages: 2
Addonics Technologies ADCFAEU3 User Manual preview
ADCFAEU3
Brand: Addonics Technologies Pages: 2
Intratone 04-0106-EN Wiring Diagram preview
04-0106-EN
Brand: Intratone Pages: 2
Intratone 04-0108 Quick Start Manual preview
04-0108
Brand: Intratone Pages: 4

Brands by name

Popular brands

Load more brands