manualshive.com logo in svg

Unitech MS842N, User Manual

The Unitech MS842N is a high-performance barcode scanner that offers reliable scanning capabilities. To make the most of this device, ensure you have its User Manual handy. Download the manual for free from manualshive.com to get detailed instructions and enhance your experience with this product.

Share
Download
background image

Code ID Prefix................................................................................................................................................................ 32 

Restore All Default Code IDs .................................................................................................................................. 33 

Modify Code ID ....................................................................................................................................................... 33 

Custom Prefix................................................................................................................................................................. 37 

Enable/Disable Custom Prefix ................................................................................................................................ 37 

Set Custom Prefix ................................................................................................................................................... 37 

Custom Suffix................................................................................................................................................................. 38 

Enable/Disable Custom Suffix................................................................................................................................. 38 

Set Custom Suffix ................................................................................................................................................... 38 

Data Packing.................................................................................................................................................................. 39 

Normal Pack ........................................................................................................................................................... 39 

Terminating Character Suffix .......................................................................................................................................... 40 

Enable/Disable Terminating Character Suffix.......................................................................................................... 40 

Set Terminating Character Suffix............................................................................................................................. 41 

Chapter 8 Symbologies.............................................................................................................................................................. 42

 

General Settings ............................................................................................................................................................ 42 

Enable/Disable All Symbologies.............................................................................................................................. 42 

Enable/Disable 1D Symbologies............................................................................................................................. 42 

Enable/Disable 2D Symbologies............................................................................................................................. 42 

1D Symbologies ............................................................................................................................................................. 43 

Code 128 ................................................................................................................................................................ 43 

Restore Factory Defaults ........................................................................................................................................ 43 

Enable/Disable Code 128 ....................................................................................................................................... 43 

Set Length Range for Code 128 ............................................................................................................................. 43 

GS1-128 (UCC/EAN-128) ....................................................................................................................................... 44 

Restore Factory Defaults ........................................................................................................................................ 44 

Enable/Disable GS1-128......................................................................................................................................... 44 

EAN-8 ..................................................................................................................................................................... 45 

Restore Factory Defaults ........................................................................................................................................ 45 

Enable/Disable EAN-8 ............................................................................................................................................ 45 

Transmit Check Digit............................................................................................................................................... 45 

Add-On Code .......................................................................................................................................................... 46 

EAN-8 Extension..................................................................................................................................................... 47 

EAN-13 ................................................................................................................................................................... 48 

Restore Factory Defaults ........................................................................................................................................ 48 

Enable/Disable EAN-13 .......................................................................................................................................... 48 

Transmit Check Digit............................................................................................................................................... 48 

Summary of Contents for MS842N





































































































































Reviews:

No comments

Related manuals for MS842N

Youjie 3300 Quick Start Manual preview
3300
Brand: Youjie Pages: 16
Gallagher T12 Installation Note preview
T12
Brand: Gallagher Pages: 13
Magtek tDynamo Installation And Operation Manual preview
tDynamo
Brand: Magtek Pages: 39
ACS APG8201 PINhandy 1 Technical Specifications preview
APG8201 PINhandy 1
Brand: ACS Pages: 8
ID Mate Quest CD User Manual preview
Quest CD
Brand: ID Mate Pages: 36
Microtech PCD-47 User Manual preview
PCD-47
Brand: Microtech Pages: 35
Stealth Cam STC-CRV43 Instruction Manual preview
STC-CRV43
Brand: Stealth Cam Pages: 24
Datecs BlueLite v2 User Manual preview
BlueLite v2
Brand: Datecs Pages: 18
Datalogic Gryphon I GM440 Series Product Reference Manual preview
Gryphon I GM440 Series
Brand: Datalogic Pages: 350
Farpointe Data CONEKT PCR-620 Quick Start Manual preview
CONEKT PCR-620
Brand: Farpointe Data Pages: 2
Canon H1 Service Manual preview
H1
Brand: Canon Pages: 112
Hama Photo Player Operating Instruction preview
Photo Player
Brand: Hama Pages: 42
ZKTeco BR1200 Series Installation Manual preview
BR1200 Series
Brand: ZKTeco Pages: 7
ZKTeco UHF10F Pro Reader User Manual preview
UHF10F Pro Reader
Brand: ZKTeco Pages: 25
Renkforce 809339 Operating Instructions preview
809339
Brand: Renkforce Pages: 4
Renkforce 1095090 Operating Instructions preview
1095090
Brand: Renkforce Pages: 4
Rosslare CSN SMART AY-H6355BT Installation And User Manual preview
CSN SMART AY-H6355BT
Brand: Rosslare Pages: 35
SIIG JU-CR0012-S1 Quick Installation Manual preview
JU-CR0012-S1
Brand: SIIG Pages: 8

Brands by name

Popular brands

Load more brands