Unitech ES700 User Manual Download

Page: 69 / 97



Note 2-

If the corresponding linear 1D barcode symbol is set disable, only 2D composite data will be output

after a success decode.



Note 3- While this feature is set disable, if the corresponding linear 1D barcode symbol is set enable, only

1D data will be output after a success decode.



Note 4-

For UPC/EAN Composite, if 2D composite component is failed to decode and 1D linear component

is successful to decode, then only 1D data will be output.



Note 5-

If both GS-128 and DataBar Composite are set Enable, both 1D and 2D components

must be successfully decoded to output both 1D and 2D data.

GS1-128 Composite, DataBar Composite-

Two versions of GS1 Composite symbol are enabled.

GS1-128

Composite, DataBar Composite, UPC/EAN Composite-

Three versions of GS1 Composite symbol are enabled.

Multiple-scan setting

Single-scan setting

Option barcode

Option

Alpha. entry

GS1 composite version enabled

None (Disable)

00*

GS1-128 Composite,

DataBar Composite

GS1-128 Composite,

DataBar Composite,
UPC/EAN Composite

Summary of Contents for ES700


































































































Search results

Summary of Contents for ES700

Reviews:

Related manuals for ES700

Brands by name

Popular brands

Unitech ES700, User Manual

Search results

Summary of Contents for ES700

Reviews:

Related manuals for ES700

Brands by name

Popular brands