Unitech ES700, User Manual

Page: 21 / 97

17
3-6 Scan mode & some global settings
Scan mode:
Continue-The image platform always keeps scanning, and it does not matter when Stand-by duration is elapsed.
Auto-detection- Good-read on – By setting Enable, the imager will start operating if any nearby object has been
detected. The imager stops scanning when no code is successful decoded after the
elapsed. Once the imager stops scanning, the present object must be removed to
.
Auto-detection- Good-read off – By setting Enable, the imager will start operating if any
nearby object has been detected. The imager will stop scanning when there is a successful reading or no code is
decoded after the elapsed. Once the imager stops scanning, the present object must be
removed to enable .
Barcode detection: In image auto-induction mode, barcode detection means that the scanner
detects an object similar to a barcode to trigger decoding, such as text, graphics, barcodes, and so on.
Barcode detection delay: The barcode detection delay means that the detection function is enabled when no object
is detected within the set delay.
Same barcode delay time for 1D symbol: If a 1D barcode has been scanned and output once successfully, the image
platform must output the same barcode data beyond delay time. When this feature is set to be “0xFF”, then the delay
time is indefinite.
Same barcode delay time for 2D symbol: If a 2D barcode has been scanned and output once successfully, the image
platform must output the same barcode data beyond delay time. When this feature is set to be “0xFF”, then the delay
time is indefinite.
Double confirm: If it is enabled, the image platform will require a several times of same-decoded-data to confirm a
valid reading.
Global Max./Min. code length for 1D symbol: These two lengths are defined as the valid range of decoded 1D barcode
data length. Make sure that the minimum length setting is no greater than the maximum length setting, or otherwise
the labels of the symbol will not be readable. In particular, the same value can be set for both minimum and maximum
reading length to force the fixed length barcode decoded.
Notes:
1. Please set the max./min. length for individual barcode in later sections, if special demand is requested.
2. The number of check digits is included in max./min. code length.
3. These two settings have no effect on the symbols with fixed-length, e.g. UPC-A, UPC-E, EAN-13, EAN-8 and
China Post.
Global G1-G6 string selection: The image platform offer one or two string group for all symbols. By setting one or two
digits to indicate which string group you want to apply. You may refer to 3-41 G1-G6 & C1-C3 & FN1 substitution
string setting and 3-42 G1-G4 string position & Code ID position .
Example: Group 1 → set 01 or 10. Group 2 and 4 → set 24 or 42.
All valid settings include 00, 01, 02, 03, 04, 05, 06, 10, 11, 12, 13, 14, 15, 16, 20, 21, 22, 23, 24, 25, 26, 30, 31, 32,
33, 34, 35, 36, 40, 41, 42, 43, 44, 45, 46, 50, 51, 52, 53, 54, 55, 56, 60, 61, 62, 63, 64, 65 and 66.
Stand-by duration
enable Auto-
detection
Stand-by duration
Auto-detection