39
Check digit verification: The check digit is optional and made as the sum module 43 of the numerical value of the data
digits.
Check digit transmission: By setting Enable, check digit will be transmitted.
Max./Min. code length: Each symbol has own max./min. code length. If both setting of max./min. code length are
“00”s, the setting of global max./min. code length is
effective. The length is defined as to the actual barcode data
length to be sent. Label with length exceeds these limits will be rejected. Make sure that the minimum length setting
is no greater than the maximum length setting, or otherwise all the labels of the symbol will not be readable. In
particular, you can see the same value for both minimum and maximum reading length to force the fixed length
barcode decoded.
Code ID setting: Refer to
Insertion group selection:
of
3-11 UPC-A
.
Start/End transmission:
The start and end characters of Code 39 are “*”s. You can
transmit all data digits including two “*”s.
“*” as data character: By setting Enable, “*” can be recognized as data character.
Convert Code 39 to Code 32: Code 32 is a variant of Code 39 used by the Italian pharmaceutical industry.
Note that Code 39 must be enabled in order for this parameter to function. Format of Code 32
“A” (optional)
Data digits (8 digits)
Check digit (1 digit)
Code 32 Prefix “A” transmission: By setting Enable, the prefix character “A” can be added to all Code 32 barcodes.
Trioptic Code 39 read: Trioptic Code 39 is a variant of Code 39 used in the marking of magnetic tapes and computer
cartridges. Trioptic Code 39 symbols always contain six characters.
Format
Start
character
($)
Data digits (6
digits)
End
character
($)
Trioptic Code 39 Start/End transmission: The start and end characters of Trioptic Code 39 are “$”s. You can transmit
all data digits including two “$”s.
Multiple-scan setting
Single-scan setting
Option barcode
Option
Alpha. entry
Read
Disable
00
Enable
01*
*
Check digit verification
Disable
00*
*
Enable
01
Check digit transmission
Disable
00*
*
Enable
01
Max. code length
00-99
00-99
Code ID setting of
3-11 UPC-A
.
Refer to Insertion group selection
Summary of Contents for ES700
