Unitec Portal TI+ Owner'S Manual Download Page 96

Page: 96 / 101

P O R T A L

Document Number:

PTL1028

Document Title:

Portal 3 Owners Manual

Figure 74. Guide Arm Cover Removed

Using a screwdriver, gently pry off the old hopper arm. Be very careful not to break the pins
that hold the arm in place.

10.

Place the new hopper arm into the slot exactly as the old one was.

11.

Place the new hopper wheel into the plastic hopper exactly as the old one was.

12.

Once the new guide arm and dispensing-wheel have been replaced, reinstall the coin
guide arm cover.

13.

Slide the black plastic top back onto the hopper-cube assembly. Securely latch it in place
by locking the clasp.

14.

Place the hopper-cube back onto the mounting bracket and snap the locking tab back into
place.

15.

Reattach the coin bucket by replacing the three screws you removed previously. Be sure
that the coin exit opening of the hopper-cube is properly aligned with the exit chute of the
metal housing.

Summary of Contents for Portal TI+






































































































Search results

Summary of Contents for Portal TI+

Reviews:

Related manuals for Portal TI+

Brands by name

Popular brands

Unitec Portal TI+, Owner'S Manual

Search results

Summary of Contents for Portal TI+

Reviews:

Related manuals for Portal TI+

Brands by name

Popular brands