![background image](http://html1.mh-extra.com/html/unit/usp-1000d/usp-1000d_instruction-manual_3969344008.webp)
Time from heating to
Total time from heating
Menu
Capability
pressurizing process
to keeping warm
(min)
(min)
2 cup rice
6-9
18-23
Cooking
4 cup rice
10-13
22-27
6 cup rice
14-17
28-33
8 cup rice
18-21
34-39
1/5 height water
8-11
29-34
Congee
2/5 height water
16-19
36-41
3/5 height water
24-27
40-45
4/5 height water
29-31
45-50
1/5 height water
8-11
30-33
Meat,
2/5 height water
16-19
38-41
chicken
3/5 height water
24-27
40-43
4/5 height water
29-31
46-48
1/5 height water
8-11
34-39
Soup
2/5 height water
16-19
41-46
3/5 height water
24-27
45-50
4/5 height water
29-31
50-55
1/5 height water
8-11
43-48
Meat,
2/5 height water
16-19
47-52
Bean
3/5 height water
24-27
57-62
4/5 height water
29-31
66-71
1/5 height water
8-11
20-23
Fish
2/5 height water
16-19
28-31
3/5 height water
24-27
34-37
4/5 height water
29-31
39-41
•
If you have pre-set the time, the timer will decrease each time by 1 hour. When the countdown ends,
the display shows “0”, the timing indicator goes out, and cooking begins.
•
In case of no time pre-set, press the Menu Buttons (31-35) or Function menu Button (36), the indi-
cator will light up, denoting start of cooking.
•
Pressure holding process begins when pressure inside is high enough:
a.
If you press any Menu Buttons (31-35) on the Control Panel (10) the Display (27) will show “P00”.
b. If you press the Function menu Button (36), the Display (27) will show “P00” (00 denotes setting
pressure holding time; for example, if you set 15 minutes, the display will show “P15”), and the
pressure holding time decreases each time by 1 minute.
•
When pressurizing is over, it will deliver 3 rings, the working indicator will go out and the display
shows “000”, reminding end of cooking and start of heat preservation. The Keep warm/Cancel
Indicator (30) flashes if pressure inside is high: the indicator remains light if pressure inside is low.
•
Press Keep warm/Cancel Button (30) to cancel parameter setting or current working status.
•
When no parameter set or not in working status, press Keep warm/Cancel Button (30), the Keep
warm/Cancel Indicator (30) will light up, indicating the start of heat preservation: press in once
again to cancel heat preservation and the indicator will go out.
ENGLISH
8
Instr_USP-1000D#2 1/2/04 9:28 AM Page 8