Unisys E-@CTION EFP9800, Owner'S Manual

Page: 170 / 268

Ithaca Peripherals Proprinter Emulation Commands
7–2 3255 4073–002
Hexadecimal
Code Command Name Page
18 Clear Printer 7–6
1B 11 Perform Validation: Open Forms Compensation
Assembly 7–6
1B 13 Perform Validation: Close Forms Compensation
Assembly 7–7
1B 14 Perform Validation: Close Forms Compensation
Assembly When Slip Sensed 7–7
1B 2D 30 Cancel Underlining 7–12
1B 2D 31 Set Underlining 7–13
1B 30 Set Line Spacing to 1/8 Inch 7–7
1B 33 n Set Fine Line Spacing (n/216 Inch) 7–7
1B 36 Select Alternative Character Set 7–13
1B 37 Select Character Set (Code Page 437) 7–13
1B 41 n 1B 32 Set Fine Line Spacing (n/72 Inch) 7–7
1B 3A Set 12 Characters/Inch 7–13
1B 41 0C 1B
32 Set Line Spacing to 1/6 Inch 7–8
1B 43 00 N Set Form Length in Inches 7–8
1B 43 n n Set Form Length in Lines 7–8
1B 44 nl...nk Set Horizontal Tab Positions 7–9
1B 45 Set Emphasized Printing 7–14
1B 46 Cancel Emphasized Printing 7–14
1B 47 Set Enhanced Printing 7–14
1B 48 Cancel Enhanced Printing 7–14
1B 4A n Fine Line Feed 7–9
1B 4B n1 n2 Single-Density Graphics 7–18