Unisys E-@CTION EFP9800, Owner'S Manual

Page: 117 / 268

EFP9800 ESC/POS Commands
3255 4073– 002 6– 27
Select Head Energizing Time
Selects the head energizing time as specified by n . The head energizing time is
set for the paper type selected using the Select Print Paper(s) command (1B 63
30). (When both receipt/journal paper and slip are selected, the head energizing
mode for slip is enabled.)
This command is effective only at the beginning of a line.
Hexadecimal Decimal ASCII Value of n
1D 45 n 29 69 n GS E n 0 = Slip/Validation
1 = Receipt/Journal Paper
Function Status
Bit Function 0 1
0 Head Energizing Time Slip Receipt/Journal Paper
1-7 Undefined
Set Left Margin
Sets the left margin as specified by
n
1 and
n
2. The left margin is calculated by
[( n 1 + 256 x n 2) x horizontal direction of the fundamental calculation pitch)].
See the Set Fundamental Calculation Pitch command (1D 50).
Hexadecimal Decimal ASCII Value of n
1D 4C n1 n2 29 76 n1 n2 GS L n1 n2 n1 = 0-255
n2 = 0-255
The settings do not apply in page mode.
•
The command is valid only at the beginning of a line.
•
The left margin is set for the paper that was selected by the Select Paper(s)
for Settings command (1B 63 31).
•
If a fraction is part of the result from calculating the left margin, it is
corrected with the remainder being truncated.
•
The maximum value of the printable area is used if any setting is greater
than that area.