U N I Q U E U G P 6 F
11
3.
Check that the spark is created by pressing the electronic ignition button on
the control panel.
4.
Before removing burner orifice, clean burner area of any soot, scale or dirt
Remove the orifice and soak it in alcohol (isopropyl alcohol or thinners) and
blow it out with compressed air. Do not use thin objects to either clean or
unblock the injector. Re-install and tighten burner orifice.
5.
Replace burner
Warning - DO NOT
use a pin or wire when cleaning the
burner orifice as damage can occur to the precision opening.
This can cause damage to the freezer or create a fire hazard. It
will also create
extremely dangerous
levels of carbon
monoxide.
E
XPLODED VIEW OF BURNER ASSEMBLY
Visually check burner flame to ensure you have a clean burning flame, this
is represented by a blue looking flame, a yellow/orange flame represents a
dirty burner or orifice and needs to be cleaned.
Baffle
V
IEW OF BACK OF THE APPLIANCE
