11.CONTROL I/O (EXTERNAL SIGNAL)
77
11-4-8. Code No. designation <level input> [pin 11 ~ 14, 36 ~ 39]
Appoint code No.
* Effective when setting the Weighing Code Selection/ Setting Code Selection by external input.
11-4-9. Code No. designation selection <level input> [pin 30]
Code numbers are inputted through the key if pin 30 is open to COM. Code numbers are inputted
through the Control I/O if pin 30 is shorted to COM.
Key input when it is OFF. External input when it is ON.
11-4-10. Graph drawing <edge input> [pin 32]
To start and stop drawing on the Graphic Screen.
When pin 32 is short to COM (OFF
→
ON) start drawing, while pin 32 is open to COM (ON
→
OFF)
stop drawing.
80 40 20 10
For 10 numerical position
8
4
2
1
For 1 numerical position
→
00 ~ 99
OFF
ON
Undefined section (within 50ms)
External
Internal
OFF
START
ON
OFF
STOP
ON
