18.SPECIFICATIONS
106
Decimal point
Selectable 0, 0.0, 0.00, 0.000
Over scale display
The input of A/D converter overflowed
LOAD
Net weight >Net over set value (5-digits setting possible) OFL1
Gross weight >Ca 9 scale division
OFL2
Gross weight >Gross over set value (5-digits setting possible) OFL3
Center zero
‘CZ’ turns on when the displayed value is at the center of zero
(0 +/-1/4 scale)
Status display
Various weighing status are displayed.
Set value display
CODE (2-digits), Final (5-digits), Under (3-digits), Over (3-digits)
18-3. Configuration
Setting method
Analog type touch panel operation or set by a host computer
through RS-232C.
Memory
Initial set values-NOV RAM (Non volatile RAM).
Other set Values-C-MOS RAM backed up by a lithium battery.
18-4. Control Input/Output Signal
External input signal (24)
Signals are inputted by shorting or opening Input and COM
terminals.
External output signal (16)
Output signal circuit is an open-collector output of a transistor.
18-5. Interface
Standard equipment
2-Wire serial interface (SI/F)
Connect Controller to Printers and Remote displays (up to 3 units).
Transmitting method:
Asynchronous
Transmitting speed:
600bps
2-Wire high speed bi-directional serial interface (SI/FII)
Connect Controller to Printer, Remote displays and Converters.
Transmitting distance:
Approx. 300m
Transmitting speed:
100 times/sec.
SIF connectable unit:
max 20units
Indicator connectable unit: max 4units
