35
5
FUNCTIONS
35
FUNCTIONS
Chapter
5
Setting range and code No. of each set value
■
Upper Limit/ Lower Limit/ Near Zero (Setting Code 06 to 08)
These settings are for feed/discharge control, and direct comparisons are made with these values
irrespective of the final value.
Setting range and code No. of each set value
■
Over/Under Comparison/ Upper/Lower Limit Comparison/
Near Zero Comparison (Setting Code 20 to 22)
For each comparing point such as final, the comparing weight (gross weight or net weight) and
timing can be selected. The following three items are selectable.
1) Over/under comparison (Code No.20)
Select the weight value for Over/under comparison.
Setting/
0: Gross weight
1: Net weight
2: Comparison OFF
2) Upper/Lower limit comparison (Code No.21)
Select the weight value for upper/lower limit comparison.
Setting/
0: Gross weight
1: Net weight
2: Comparison OFF
3) Near zero comparison (Code No.22)
Select the weight value for near zero comparison.
The Near Zero signal turns ON when the comparing weight
≦
near zero set value.
Setting/
0: Gross weight
1: Net weight
2: Comparison OFF
3: |Gross weight|
4: |Net weight|
■
Over/Under Comparison Mode (Setting Code 27)
Setting/
0: Continuous comparison
1: Comparison when the external judgment input is ON
2: Comparison when the complete output is ON
3: Comparison, holding the weight value, when the complete output is ON
Set value
Setting range
Initial value
Code No.
Final
00000 to 99999
00000
00
Set point 1
00000 to 99999
00000
01
Set point 2
00000 to 99999
00000
02
CPS
0000 to 9999
0000
03
Over
000 to 999
000
04
Under
000 to 999
000
05
Set value
Setting range
Initial value
Code No.
Upper limit
00000 to 99999
00000
06
Lower limit
07
Near zero
08
