Unipulse DS252 Operation Manual Download Page 15

Page: 15 / 124

Before turning on the power

1-2.Front panel keys

Although the key functions differ according to conditions, their basic functions, meanings and

designations are briefly explained here.

Designations and functions of keys

Key (designation)

Description

①

To go to the Ach code input (selection) screen and to input
characters.

②

To go to the Bch code input (selection) screen and to input
characters.

③

To record date/time and to input characters.

④

To start interval records and to input characters.

⑤

To stop interval records and to input characters.

⑥

To write data on a CF card and to input characters.

⑦

To record sub totals and to input characters.

⑧

To record grand totals and to input characters.

⑨

To delete the just previously recorded data from the target of grand
totals (sub totals) and to input characters.

⑩

⑪

①

②

③

④

⑤

⑨

⑥

⑦

⑧

⑫

⑬

⑭

⑮

(Code A)

(Code B)

(DATE)

(START)

(STOP)

(WRITE)

(ST)

(GT)

(DEL)

Summary of Contents for DS252





























































































































Search results

Summary of Contents for DS252

Reviews:

Related manuals for DS252

Brands by name

Popular brands

Unipulse DS252, Operation Manual

Search results

Summary of Contents for DS252

Reviews:

Related manuals for DS252

Brands by name

Popular brands