Unipulse DS252, Operation Manual

Page: 66 / 124

4 Advanced use
55
4-1-3. Code table registration
The operation of code table registration is nearly the same as that of code registration described above
except for inputting a code table number corresponding to each code name.
The following shows basic operational procedures for actually setting the DS252. Then, "01" and
"SUGAR" will be registered as a code table number and code respectively on Ach for example.
1. Press the key to enter the setting mode.
2. Register the code table.
Since the setting number is [24], press the ,
→
key.
3. Select the code table number with the key and enter the code input mode with the
key.
4. Input the code name by using the numerical keys.
* Input the code name referring to "4-1-1.Code registration with the front panel keys"
(page 53).
5. After inputting the code name, confirm your entry with the key.
6. To continue registration, repeat Steps 3 to 5.
7. Exit with the key.
0 0 : F U N C T I O N
S E T T I N G
2 4 : C O D E T A B L E
C h A = 0 0 : B U T T E R
2 4 : C O D E T A B L E
C h A = 0 1 :̲
Flashing
2 4 : C O D E T A B L E
C h A = 0 1 : S U G A R
2 4 : C O D E T A B L E
C h A = 0 1 : S U G A R