Unipulse DS252, Operation Manual

Page: 58 / 124

3 Basic operation of the DS252
47
26 : Code Sorting Type
Select the method of sorting codes.
27 : File Writing Mode Setting
Set the operation in writing data on a CF card.
Setting name
26 : Code Sorting Type (SORT TYPE)
Selectable items
00 : NAME (code name) (initial value)
01 : TABLE No. (code table number)
Display
Reference Specify whether data should be sorted by code name or by code table number.
Setting name 27 : File Writing Mode Setting (WRITE MODE)
Selectable items
00 : CLEAR (continuous writing) (initial value)
01 : NON CLEAR (all data writing)
Display
Reference
・
If this is set to CLEAR (continuous writing):
By WRITE operation, data from WRITE operation to WRITE operation is written
on the CF card.
・
If this is set to NON CLEAR (all data writing):
By WRITE operation, data from GT operation to WRITE operation is written on
the CF card.
Precautions If this is set to CLEAR (continuous writing), the previous data is cleared by WRITE
operation (data accumulation will be continued); therefore, the data before the
previous WRITE operation will not be written on the CF card by the next WRITE
operation or GT operation.
2 6 : S O R T T Y P E
0 0 : N A M E
2 7 : W R I T E M O D E
0 0 : C L E A R