Unipulse DS252, Operation Manual

Page: 105 / 124

6 Record data
94
6-2-2. Recording of input data
Input data is recorded in the internal memory by any of the following operations.
・
Pressing the key on the front panel of the main body
・
Short-circuiting the [REC] terminal and [COM] terminal on the rear panel of the main
body
・
Receiving an automatic recording command from the SI/F
・
Receiving a recording command from the RS-232C
・
At interval-record time
When the data is recorded, the RECORD lamp is lighted.
The recorded contents differ according to the setting of "07: Record Every Format".
07: Record Every Format
00
：
STANDARD
Only the count, input data and unit are recorded.
01
：
+TIME
The count, input data, unit and time are recorded.
02
：
+CODE
The count, input data, unit and code are recorded.
03
：
+TIME&CODE
The count, input data, unit, time and code are recorded.
04
：
+DATE
The count, input data, unit, date and time are recorded.
05
：
+DATE&CODE
The count, input data, unit, date, time and code are recorded.
06
：
BOTH
The count and input data and unit of Ach and Bch are recorded.
07
：
BOTH+DATE
The count and input data, unit, date and time of Ach and Bch are
recorded.
08
：
BOTH FULL
The count and input data, unit, date, time and code of Ach and Bch
are recorded.
09
：
THROUGH
Data received from the RS-232C is recorded.
When this mode is selected, the other REC operations are not
accepted.