40
Kind 2 (50-65)
Item
Description
Default
Instruction
50 Alarm 1 setup
----
Entering time hhmm (Hour + Minute)
(when the first digit was enter [*], the prior
hhmm data will be cleared.)
Entering time *whhmm(W: weekday, 1 for
Monday, 2 for Tuesday …, 7 for Sunday)
Related function no. 0, 68 and ALARM directive
Is ordered from RS-232
51 Speaking time limit for incoming call
0000 0-9999 seconds
0: No control
Match to the other party’s call control
52 Speaking time limit for outgoing call
0000
53
54
55
56 DISA Password
0000
0000: Invalid
This program is for ISDK2-DISA or voice mail
card which used for the system.
57
Allow the caller to active the MIC of
receiver’s keyphone
0
0: No
1: Yes
For Uniphone full handsfree keyphone only.
Relative program: K2 Item20,120,151.
58
To memorize the adjusted volume during
speaking
1
0:To recover the default (According to K2
item 103-106)
1: Memory of talking volume (save the adjusted
volume to K2 Item103-106)
59 React to keystrokes
1
0:Start after pressing "SPKR" or lifting the
handset
1: Start after pressing any key to start on-hook
dialling
2: Start after pressing the DSS key
4-7 Start the Earphone mode (UD-36TDHFE)
60 Group pick-up
0
0: Manual (use function no. 8)
1: Automatic - Lift the handset to pick up the
ringing phone of the same group
61 Assigned the Auto pick-up station
----
Enter the assigned ringing pick-up station no.
Related program: K2 item 25-26
62 Using purpose of this phone
1
0: Hotel purpose (It must to set at " 0 " to match
check-in / check-out) ; Application for Hotel
rooms/ rental apartment that the CO line data
of this room will be cancelled after check-out.
1: General purpose or office use (the program
data of each station would not be cleared)
63 Enable to transfer the call
1
0: No
1: Yes
Notice
: To avoid the billing controversy, it’s
better to set as “0” if the telephone is used for
hotel room/ rental apartment.
64
65
