51
Kind 3 (22-31)
Item
Description
Default
Instruction
22 Busy call forward on daytime
----
According to flexible number plan (K6).
Application: Enable the station user to grab the
next designated idle CO line when the user
pressed a busy CO key. This function is similar to
the station call forward. Eg.: When CO line 1 is
busy, the system will grab the next available CO
line automatically.
23 Busy call forward on nighttime
----
24
Sequential number of trunk line while
grabbing the trunk
01
0: Unlisted
1-99: Serial no.
Application: Enable to change the CO hunting
/grabbing sequence but no need to change the
trunk card installation.
Related program: K1 item 30,65-66, K3 item 09
25 Bill metering
1
0: No
1: Yes (send the simple running account)
Only workable when install the RS-232 interface
26 CO line type
1
0: Used as station line (Related programs: K2
item 105-106)
1: Trunk line (Related programs: K2 item 103,
104; K3 item 32, 73 and function no.18, 23)
27
Ringing off time of CO incoming call
On
off
on off
24
0: Keep the CO accessing status till the call is
answered.
1-99 x 0.1 seconds
24: 1 sec. on and 2 sec. Off
44: 1 sec. on 4 sec. Off
28 Ringing time when call the other station
0
0: Keep on ringing
1-9999 ms x (K1 item 28)
Application: When install the repeater type of
doorphone.
29
The tone source of incoming call ring
type 1
245
Refer to Appendix3
Application: To distinguish the trunk line by
different ringing tone.
Eg.: Change the ringing of CO1 to be On-Hold
music, please set K3 item 29-30 to be "063".
Related programs: K1 item 28, K3 item 28,31
30
The tone source of incoming call ring
type 0
999
31 Ring type of incoming call
0:34567
TP:0:0123456789 -> 1:012345
Total 16 bit tone pattern.
The break of incoming ring tone will be different
when change the setting value 0:01234 to be
0: 23,
0: 0 1 2 3 4 changed to 0: 2 3
1 1 1 1 1 0 0 0 0 1 1
0: Use K3 item 30 programmed tone source
1: Use K3 item 29 programmed tone source
Related programs: K1 item 28, K3 item 28-30
