AC-5000 User Guide
49
UNIONCOMMUNITY Co., Ltd. / 3F Hyundai Topics Bldg. 44-3 Bangi-dong
Songpa-gu, Seoul, Korea (138-050)
Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :[email protected]
http://www.unioncomm.co.kr
3.7.6. External Device
When the user selects [ENT
~] ( [5. Terminal] [6. External Device] )
in the initial screen
◆
, the
following screen will appear.
▶
Initial setting: Identical with the screen at the left
▶
Printer
If checked
( ), it prints out the authentication result. When set to ‘1’, if authentication is
successful, the terminal ID, user ID, authentication time, authentication mode, etc. are printed
out through the printer connected to the RS232 (Debug) port of the terminal. The print out type
may vary depending on the configuration. When set to ‘Format2’, it is printed out with the
terminal name as the main subject. The printer used is
는
“SRP-350” Serial type.
▶
Lock Controller
Set to this function when the user connects a separate device instead of the terminal
lock port to control the door. In the event the user directly connected a lock to the
terminal, it is set to ‘4. None’, but it is set to ‘5.LC010’ when connected with LC010.
The user can exit to the parent menu using [ENT~] key to apply the changed value after
finishing the setting while using [F4(←)] key to cancel input during setting.
.
3.8. Information
When selecting ‘6. Information’ in the main menu, the following screen will appear.
Menu to inquire the setting condition of the terminal.
Press;
[1] key to inquire a variety of optional configurations
of the terminal,
[2] key to inquire network configuration such as IP ,
[3] key to inquire the user registration status, etc.
[4] key to inquire log data,
[5] key to inquire firmware version.
3.8.1. System Info
Select
◆
[ENT~]
[6. Information]
[6. System Info] in the initial screen
◆
