UNIMO Technology UDR-808 Full Manual Download Page 91

Page: 91 / 126

3.13.4_4 SMART

- This is used to change the selected channel into the Smart mode. If you press the button

“Smart”, the event will take place without delay and find the recorded position to start playback.

3.13.4_5 Setting ZOOM *2, *4

- It is possible to depend on ZOOM * 2, * 4: ZOOM magnification to view images in the channel

in the process of playback.

3.13.4_6 JPEG EXPORT

- This performs the function of saving the still images in a saving device of the channel in the

process of playback.

3.13.4_7 Audio ON/OFF

- If you want to playback a file with a recorded audio linked, you should select the channel with

the mouse and click on the button “Right” to view audio-related menu. Click on the button

“Playback” after turning on the audio, and the audio will be played back. If you are to use the key

on the front side of DVR, press the button “OK” and select the channel. Then, press the button

“OK” once more, and the audio-related menu will be in sight. If you click on “Playback” after

turning on the audio, the audio will be played back.

Summary of Contents for UDR-808































































































































Search results

Summary of Contents for UDR-808

Reviews:

Related manuals for UDR-808

Brands by name

Popular brands

UNIMO Technology UDR-808, Full Manual

Search results

Summary of Contents for UDR-808

Reviews:

Related manuals for UDR-808

Brands by name

Popular brands