UNIMO Technology UDR-808 Full Manual Download Page 49

Page: 49 / 126

[CLIENT]: This is a menu that is used to set Client.

-CLIENT ACCESS: This is used to set the authority for client address access (ALL/RANGE)

It is possible to have access to all addresses when ALL is selected without

limitation.

This is used to set the scope of selection in the IP addresses when RANGE is

selected.

-BEGIN ADDRESS: This is used to set IP address at the starting point when RANGE is selected

(when ALL is selected, this is not used).

-END ADDRESS: This is used to set IP address at the ending point when RANGE is selected (when

ALL is selected, this is not used).

-CMS PORT: This is used to set the RAMS access port number.

-WEB PORT: This is used to set Web port.

Summary of Contents for UDR-808































































































































Search results

Summary of Contents for UDR-808

Reviews:

Related manuals for UDR-808

Brands by name

Popular brands

UNIMO Technology UDR-808, Full Manual

Search results

Summary of Contents for UDR-808

Reviews:

Related manuals for UDR-808

Brands by name

Popular brands