UNIMO Technology UDR-808 Full Manual Download Page 11

Page: 11 / 126

1.2 Function of DVR Back Side

1. VIDEO IN

- IN: This is a terminal of CAMERA INPUT. (CVBS signals are used as Input)

- OUT: This is a terminal for Loop Out of input images. It can be used as Input of other DVR or

channels.

2. VIDEO OUT

- HD Out (1EA), VGA Monitor Out (1EA), MAIN (1EA) _CVBS, SPOT (3EA) _CVBS

3. POWER

- Power ON/OFF Switch

4. AC Inlet

- AC 100V ~ 220V (50 Hz~60 Hz) / 60W

5. Ethernet

- (10/100/1000 Mbps) RJ-45 Connector

6. ALARM Output (NO, COM, NC)

- This provides four alarm outputs in total. It uses a relay to provide contact outputs while an

alarm is off. The user can select NO, COM, or NC contacts to use according to the methods of

operating the connected alarm devices. NO (Normal Open) is a contact where it is separated from

COM (Common) in the normal state and is linked with it when an alarm is off; NC (Normal Close)

Summary of Contents for UDR-808































































































































Search results

Summary of Contents for UDR-808

Reviews:

Related manuals for UDR-808

Brands by name

Popular brands

UNIMO Technology UDR-808, Full Manual

Search results

Summary of Contents for UDR-808

Reviews:

Related manuals for UDR-808

Brands by name

Popular brands