15
Chapter 2 Basic Methods of Operation
2.1. Power Supply ON/OFF
2.1.1 Power Supply ON
- Connect the electrical cable to switch the “Power” on at the backside of the DVR, turning on the
green light of the Power LED, which shows that the power supply is being stably provided. There
may be a gap in the time of booting according to the capacity of the HDD. During the booting,
the bar “Progress” on the lower part shows the situation of booting. After the booting is finished,
the OSD (On Screen Display, letters are displayed on the screen) will be in view, a sign that the
booting has been successfully completed. Then, the user can now operate the DVR freely.
2.1.2 Power Supply OFF
- In order to end the DVR, press the button “Shutdown” in the menu “Setup” and the window for
entering the password will open. Enter the user-set password (Default value: 111111) and the DVR
will end normally. After the message „Normally ended‟ is in view, turn off the “Power Switch” at
the backside.
2.1.3 Setting time (date and time)
- Enter the date and time on the DVR. After setting the time, move to the item on applying date
and time and press the button “OK” to apply the new time.
2.1.4 Setting ID and password
- This is used to change user ID and password on the DVR.
2.1.5 Setting network
- Select the setting of Network Time in the “Setting of Network” in the menu. It supports STATIC,
DHCP, and DDNS.
