UNIMO Technology UDR-808 Full Manual Download Page 43

Page: 43 / 126

-CHANNEL: It is possible to select a channel to play if the button “Play” is pressed on the front

side of the DVR and also when the button “Play” on the remote controller during the state of Live.

Selecting ALL will allow all channels to play at the same time but would not allow the audio to be

set.

- STARTING POINT: It is possible to set a place in which the play starts in case of direct playback.

You can select the following items: (before 5 minutes, 30 minutes, 1 hour, 6

hours, 12 hours, 24 hours)

-AUDIO: This is used to decide whether or not to play the audio in case of direct playback. It is

possible to select either ON or OFF. If it is ON, it is possible to play along with the audio; but if it

is OFF, the audio will not be played. At this time, it is possible to play the audio only when the

recorded data has an audio file along with it.

3.5 DISPLAY-Setting Menu

Fig. 3.5 Screen of DISPLAY Menu

Summary of Contents for UDR-808































































































































Search results

Summary of Contents for UDR-808

Reviews:

Related manuals for UDR-808

Brands by name

Popular brands

UNIMO Technology UDR-808, Full Manual

Search results

Summary of Contents for UDR-808

Reviews:

Related manuals for UDR-808

Brands by name

Popular brands