Chapter 3 LED Display Control Setting
28
5) Adjust Coefficient: Perform a simple adjustment if the displaying effect is not good
enough after you upload the coefficient. Then click
Next
.
Figure 3-19 Simple Adjustment
Red
：
Adjust the red brightness value of calibration coefficients.
Green
：
Adjust the green brightness value of calibration coefficients.
Blue
：
Adjust the blue brightness value of calibration coefficients.
6) Save Coefficients: Click
Save
to save the correction coefficients to the hardware.
The saved coefficients are retentive even after a power failure. Then click
Finish
.
Figure 3-20 Saving Correction Coefficients
