Uniks Link LAN, Manual

Page: 44 / 71

Link LAN
20
3. Press . The following view is shown:
4. Press SET/UNIT to select the 0-9 marker and again
SET/UNIT to set the length 10 ÷ 250 (unit m) or 30 ÷ 750 (ft
unit). The value flashes to display. Use the indicator keys
or to decrement or increment the value,
respectively
5. Press the key to save all settings and return to the
main view. Return in the view to display YES
6. Perform the measurement. The values will be considered by
the instrument as a reference for that specific length measure.
5 Maintenance
Battery replacement
1.Turn off the instrument and remove the cable from the input terminal.
2.Lift the lectern, press on the battery compartment cover tab to open it
3.Remove batteries and insert new batteries of the same type while
respecting the indicated polarities
4.Close the battery compartment cover
5.Do not disperse the batteries used in the environment. Use the
appropriate containers for disposal
Warning
If the " " symbol appears on the LCD,
immediately replace the battery