Uniks Link LAN, Manual

Page: 42 / 71

Link LAN
18
5.Press the SET/UNIT button to select the current remote drive
(ex: #3)
6.Press the button to test the test on the cable under
consideration
7.Disconnect the instrument, connect it to another cable, and
repeat operations from point 5
Cable length measurement
The instrument measures the length of cables with UTP/STP
RJ45 connectors. Do the following:
1.Turn on the instrument by pressing the
2.Enter the programming menu and select the numeric marker
(values 0 through 9) to which the cable length type and eventual
calibration are associated
3.Connect the end of the test cable to the input RJ45 connector
4.Connect the other end of the test cable to the RJ45 connector
of the remote unit #1