Uniks Link LAN, Manual

Page: 35 / 71

Link LAN
11
Cable type settings
1.Turn on the instrument by pressing the
2.Press and hold the SET/UNIT button for 3s.
3.Press the indicator keys or until displayed as
shown in the figure
4.Press the SET/UNIT button. Parameter "0" flashes to display.
this parameter allows you to select one of the numeric
configurations from 0 to 9 saved by the user based on the type
and whether the cable length is calibrated
5.Press the indicator key or to select the value
from options 0 ÷ 9
6.Press the SET/UNIT button to switch to selecting the cable
type. The "CA5" parameter flashes on display
7.Press the indicator key or to select the cable
type from the options: CA5 (CAT5), CA6 (CAT6)
8.Press the SET/UNIT button to switch to selecting the cable
type with RJ45 connector. The "StP" parameter flashes on
display
9.Press the indicator key or to select possible
options: StP (shielded STP cable) or UtP (unshielded UTP
cable)