Uniks Link LAN, Manual

Page: 43 / 71

Link LAN
19
5.Press the button to select the cable length
measurement function
6. Press the button to perform the length measurement
for the "1-2" pair for RJ45 cables
7. press the indicator key or to view and length
measure the remaining "3-6", "4-5", and "7-8" pairs of the
RJ45 cable under consideration
Cable length calibration
To obtain accurate measurements you can calibrate the
instrument on the specific cable used. To calibrate, connect the
reference cable (known a priori in length) directly to the
instrument without the patch cables and follow these steps:
1.Turn on the instrument by pressing the
2.Press and hold the SET/UNIT
button for 3s and move with the
indicator to the display shown