Unigas PBY1025, Manual Of Installation - Use - Maintenance

Page: 84 / 119

4
NAVIGATION MENU
RWF55 is preset good for 90% of applications. However, you can set or edit parameters as follow:
Set-point: set or modification:
When the burner is in stand-by, (safety loop open, that is terminals 3-4/T1-T2 on the 7 pole plug open) push the Enter button: on the lower display
(green) Opr appears; push Enter again and in the same display SP1 appears. Push Enter again and the lower display (green SP1) flashes. Using the up
and down arrows change the set-point on the upper display (red).Push Enter to confirm and push ESC more times to get the home position.
Parameter level
Parameter level -
PArA
Pb1, dt, rt, db, tt
Heating controller
HYS1 , HYS2 ,
HYS3
Cooling controller
HYS4 , HYS5 , HYS6
q, At1, Ht1, At2, Ht2
Configuration level –
ConF
and lower level
Analog inputs
InP ..
Controller
Cntr
Thermal shock protection rAFC
Alarm function
AF
Controllig outputs
outP
Binary inputs
binF
Display
diSP
Interface
intF
Basic display
Main
navigation
one level
down
next parameter
previous parameter
one level
back
User Level -
Opr
SP1
or
SP2
(editable)
dSP
readable and editable
through
bin1
= 2
InP1
or
y
(only display)