Unigas P60 VS, Manual Of Installation - Use - Maintenance

Page: 11 / 132

PART I: SPECIFICATIONS
11
MOUNTINGS AND CONNECTIONS
To get rid of the burner’s packing, follow the procedures laid down by current laws on disposal of materials
Packing
The burners are despatched wooden cages whose dimensions:
P60 VS: 1390
х 870 х 960 mm (L x P x H)
P72 VS - P73 VS: 1480 х 950 х 1110 mm (L x P x H)
Packing cases of this kind are affected by humidity and are not sui-
table for stacking. The following are placed in each packing case:

burner with gas train detached;

gasket to be inserted between the burner and the boiler;

envelope containing this manual
Fitting the burner to the boiler
To perform the installation, proceed as follows:
1
fix 4 holes on the boiler’s door, according to the
burner’s drilling plate described on paragraph
“Overall dimensions”;
2 place the gasket on the burner’s flange;
3 install the burner into the boiler;
4 fix the burner to the stud bolt, by means of the
fixing nuts, according to Fig. 1.
5 After fitting the burner to the boiler, ensure that the
gap between the blast tube and the refractory
lining is sealed with appropriate insulating material
(ceramic fibre cord or refractory cement).
Key
1 Burner
2 Fixing nut
3 Washer
4 Sealing gasket
5 Stud bolt
6 Blast tube
Fig. 1
H
P
L