Unigas P60 VS, Manual Of Installation - Use - Maintenance

Page: 103 / 132

7
Fault History
To visualise the Fault History , select it and press the ENTER key. The message will be as:
alternating by an error message as:
To see the other Fault History pages, press the arrow keys.
To exit the Fault History pages, press ESC.
Lockout History
To visualise the Lockout History , choose the related item and press ENTER. The message will be:
alternating by an error message as:
To see the other Lockout History pages, press the arrow keys.
To exit the Lockout History pages, press ESC.
Setting the temperature set-point value
To set the temperature set-point value, that is the generator operating temperature; proceed as follows.
From the main page, enter the main menu by pressing the ESC key twice:
by means of the arrow keys, select “Params&Display”, press ENTER: the system will ask you to enter the proper password
1 Class: 05Gas
Code BF Phase: 10
Diag.: 00 Lod: 0.0
Start No. 88
O2 control and
limiter automat
deactivated
1 10.08.07 13.47
C:71 D:00 F: 12
Start No: 88
Load 0.0 Gas
No flame at end
of safety time
Operational Status
Operation
Manual Operation
Params& Display