UniFlow microMIND V2, Installation & Configuration Manual

Page: 32 / 42

Specifications
Model:
▪ microMIND V2 ▪
▪ microMIND V2 POE
▪
Power Supply:
▪ The microMIND V2 is available in two different versions. ▪
One with PoE (Power over Ethernet) and one without.
The two different versions can easily be distinguished by
the sticker on the back.
If you have a microMIND V2 that does not support PoE
or if your network switch does not support PoE, you
have to use the respective power supply.
▪ 12 V LPS (PS2), min. 450 mA ▪
▪ Use a polarized plug 2.1/5.5 mm with positive wire to
▪
the inner jack.
Ethernet Connector:
▪ 2x RJ-45 Ethernet connection with a built-in 10/100 ▪
MBit switch.
USB Connector:
▪ USB Type A connection with USB 1.1 to connect a ▪
MiCard or MiCard PLUS (since firmware V2.0.5) reader.
D-SUB-15:
▪ Digital I/O Connector to lock/unlock the machine for ▪
copy accounting.
Indicators:
▪ The microMIND V2 is equipped with colored status LEDs ▪
(see LED Status on page 4).
Dimensions:
▪ 113 mm x 70 mm x 25 mm (4.45" x 2.76" x 0.98") ▪
Weight:
▪ microMIND V2 118 g (4.16 oz) ▪
▪ microMIND V2 POE 130 g (4.58 oz)
▪
Operating Temperature Range:
▪ 0 … +40 °C (32 … +104 °F) ▪
Included Items:
▪ microMIND V2 or microMIND V2 POE ▪
▪ Hook-and-look tape
▪
▪ Ethernet cable
▪
▪ Power supply 12 V (safety certified and only with
▪
microMIND V2)
▪ Installation manual ▪
Supported Readers:
▪ MiCard ▪
▪ MiCard Magnetic Card Reader
▪
▪ MiCard V2 HID
▪
▪ MiCard V2 HiTag
▪
▪ MiCard V2 Multi
▪
▪ MiCard V3 Multi
▪
▪ MiCard PLUS (since firmware V2.0.5)
▪
▪ USB HiD Compliant Readers with special keyfile
▪
20
Specifications
9