UniFlow microMIND V2, Installation & Configuration Manual, Page: 39 / 42

FAQ
How to obtain the MAC Address of a microMIND V2?
The MAC Address consists of two parts. The first part is the vendor ID for NT-ware, which
is always the same: 743256
The second part is the serial number of the microMIND V2, for example 100012.
Following this, the resulting MAC Address will be: 74:32:56:10:00:12
How can I reset the port configuration settings to its default values?
Open the microMIND V2 website and select the Port Configuration page. Reset the port
configuration settings to its default values by simply clicking on Upload & Reboot while
leaving the Upload Port I/O configuration file field empty.
How do I run a Telnet session with the microMIND V2?
To use Telnet, you first should ensure that the Telnet Client is installed on your
computer. On a Windows Server 2008 (R2) you can add it as a feature if not yet
installed.
1. Open a command prompt in Windows. 1.
2. Type: telnet <IP-address of the microMIND V2> 53215
2.
Default credentials for all regions except the US:
◦ Username: ntware ◦
◦ Password: dwarf
◦
Default credentials for the US:
◦ Username: ntware ◦
◦ Password: [device_serial_number]
◦
You can find the device serial number on the sticker on the back of the device.
3. Type HELP and confirm with Enter to view a list of supported commands. 3.
Changing the user name and password
a. Enter setuserdetails.
a.
27
FAQ
10