Uniden XTRAK 50 Series Owner'S Manual Download Page 2

Page: 2 / 40

WATERPROOF: IP67

Uniden’s XTRAK 50 / XTRAK 50 PRO radio is designed to meet the

water & dust ingress standard of IP67.

This Means:

Being defined as able to withstand water splashes from any direction.

The XTRAK 50 / XTRAK 50 PRO will only meet this rating if fully

assembled and all knobs, covers and fittings are well maintained and

correctly fitted. This means that the accessory cover is fully closed,

and the battery pack and antenna are attached and securely fastened.

Note: Radio does not retain its IP67 rating when an accessory Earpiece or Speaker
MIC is connected.

LITHIUM ION BATTERY PACK WARNING

• This equipment contains a Lithium Ion Battery Pack.

• The Lithium Ion Battery Pack contained in this equipment may

explode if disposed of in a fire.

• Do not short-circuit the Battery Pack.

• Do not charge the Lithium Ion Battery Pack used in this equipment in

any charger other than the one designed to charge this Battery Pack.

Using another charger may damage the Battery Pack or cause the

Battery Pack to explode.

• Lithium Ion batteries must be disposed of properly.

NOTE

USER LICENSE INFORMATION

The citizen band radio service is licenced in Australia by

ACMA Radio-communications (Citizen Band Radio

Stations) Class Licence and in New Zealand by MBIE

General User Licence for Citizen Band Radio and

operation is subject to conditions contained in those

licenses.

Warning

UNIDEN XTRAK 50 Series

Handheld UHF-CB Transceiver

XTRAK 50_50PRO OM_r7.1.indd 2

11/06/2021 07:12:38

Summary of Contents for XTRAK 50 Series









































Search results

Summary of Contents for XTRAK 50 Series

Reviews:

Related manuals for XTRAK 50 Series

Brands by name

Popular brands

Uniden XTRAK 50 Series, Owner'S Manual

Search results

Summary of Contents for XTRAK 50 Series

Reviews:

Related manuals for XTRAK 50 Series

Brands by name

Popular brands