7
Standing Monitor up on a Table
Pull the table stand away from the back of the monitor and place
1.
monitor on a flat level surface with the stand.
Note: Make sure that the flat surface is close to a power source so it
can be plugged in
Pull the bottom side of the stand away from the monitor and stand
2.
the monitor up on a table.
Plug the jack of the small AC adaptor into the back of the monitor
3.
(labeled DC IN).
Note: Make sure to connect the smaller of the two AC adaptors to the
monitor - as a safety measure only the smaller AC adaptor will fit.
Plug the other end of the power cable into a power source (surge
4.
protecting power source is recommended) .
Plugging Monitor into Another Monitor
The monitor comes equipped with an audio/video output jack for connecting to an optional external
monitor or A/V device.
Note: when the A/V cable is connected the display and/or audio switches to the externally connected
device. The Talk feature (microphone) remains at the main monitor.
Monitor Stand
UWG700 OM.indd 7
28/9/11 9:41:37 AM
