13
Antenna:
1.
Allows the signal between the camera and monitor to stay strong.
Power Light:
2.
The light will glow green when the camera is properly powered and the doorbell is pressed.
Infrared LEDs:
3.
These lights allow your camera to see up to 2m in the dark.
IR Sensor:
4.
Senses when it is dark so night vision turns on automatically.
Speaker
5.
Camera Lens
6.
Microphone:
7.
The microphone that visitors would speak in is located in this area.
Doorbell Button:
8.
When this button is pressed a chime will sound on the camera and through the paired monitor.
Mounting Tabs:
9.
These tabs are inserted into the slots on the flat camera mount.
Power Connection:
10.
Black wire connects to the negative connection and the red wire connects to this positive connection to power
the camera.
Door Strike Connection:
11.
Negative and positive connection to power the door strike (15V DC optional electronic door strike compatible).
Pairing Button:
12.
Pressed when pairing the camera to the monitor. Please note that the unit must be plugged into a power outlet
to pair devices.
Small Backing:
13.
To be removed when connecting the camera to a power source or door strike.
Wire Area:
14.
Pull wires through the hole in the center of the plug. This helps keep camera protected from rain.
Reset Button:
15.
Resets cameras settings. Use only if camera malfunctions. You may have to re-pair the devices after pressing the
reset button.
Mounting holes:
16.
Secures the camera onto camera mount.
UWG700 OM.indd 13
28/9/11 9:41:43 AM
