15
Antenna:
1.
Allows the signal between the camera and monitor to stay strong. Keep pointed up for best reception.
SD card slot:
2.
Insert an optional SD card into this area to record and store footage.
Speakers
3.
Record Indication:
4.
When light is flashing (red) it will indicate that the device is recording.
Visitor Indication:
5.
When light is on (green), the device is indicating that you have an unanswered door chime with recorded
footage. The Light will stop flashing once you have entered the event list.
Power/Talk:
6.
Display off: Press and hold to turn power on/off
Display on: Press to answer an incoming visitor ring. Press and hold to Talk to the visitor. Press momentarily to
hang up on the camera.
View/Del (Delete):
7.
Pressing this button displays the camera’s view (not available when using batteries)
Pressing it in the event list menu can delete a selection
Open/OK:
8.
If the camera is connected to an electronic door strike (not included) pressing this button will unlock the door.
This button also works as a selection button when accessing the menu.
Menu / Exit:
9.
Pressing this button enters and exits the menu.
Rec (Record) / down arrow:
10.
Pressing this will prompt recording if viewing the camera. If you are accessing any menu options it also scrolls
through the menu choices.
Vol (Volume) / side arrow:
11.
Pressing this turns up and down the volume, is you are accessing the menu it also allows you to scroll through
the menu options. Please note: volume is not adjustable during recording.
Microphone
12.
Table Mount:
13.
Pulls from the monitor so that it can be mounted on a table.
Mounting sections:
14.
The tabs on the monitor mount connect to the monitor with these sections.
AV Out:
15.
The audio/video plug connects here so you can view content on a larger screen.
Power Plug Jack
16.
UWG700 OM.indd 15
28/9/11 9:41:45 AM
